When should you not use Helvetic... from sagvdsb's blog

When should you not use Helvetica?

In Helvetica, some characters are very difficult to distinguish. In the image below, you can see that at smaller sizes, some of Helvetica's character combinations are disastrous in terms of both readability and legibility. Helvetica is clearly not a suitable typeface for body text.

What is the best material for branding irons?

BrassBrass and steel are two very different metals. In short, brass is a softer, yellow (gold) colored metal. It is probably the most common metal used in modern branding irons, as it is very easy to cut on a CNC mill.

What is the difference between branding and tattooing?

Body branding is a type of body modification that uses burn marks and scars to create designs on the skin. Some people believe that body branding can be an alternative to tattoos, but skin branding is not a tattoo (it does not use tattoo ink) and comes with its own set of risks.

Should I polyurethane before assembly?

The confusing answer to your question is that it depends. As a general rule of thumb, pre-finish if it will be difficult or tedious to finish after assembly. For example, inside a small cabinet or where three planes meet. Think of a bookshelf with shelves touching the sides and back.

How do you transfer letters to wood?

Place the paper lettering side down on the tree.

Flip the paper over so that the wax paper is facing down. Place the paper on top of the wood and press it in when you are happy with the placement. Tape the corners to keep it in place. Make sure the wax paper/printed letters are touching the wood.

How can I prevent ink from bleeding onto wood?

Sandpaper is the primary method to create a smooth surface and prevent grain bleed. As a rule of thumb, you should always use a coarse abrasive before starting a project and move to a finer abrasive as needed.

What happens if I don't sand before staining?

Do I need to sand the wood before staining it? The wood needs to be sanded well before it gets stained. This process opens up the pores of the wood, allowing it to better absorb dirt. It also smooths out surface scratches that are exacerbated by dirt.

Should I moisturize the wood before staining?

Because wood's pores are irregular, using a conditioner can help reduce the chance of staining from the staining process. This is especially true for soft or porous woods. Wood conditioner can go a long way in making your finished project look more professional and sophisticated. wood branding stamps

Why sand between polyurethane coats?

Be sure to sand the polyurethane between coats. Sanding removes drips, air bubbles, and other uneven spots from each coat.

What does iron do to wood?

Oak, redwood, cypress, and cedar are particularly susceptible to iron stains because they contain high amounts of tannin-like extracts. Discoloration is caused by a chemical reaction between extractives in the wood and iron in steel products such as nails, screws, and other fasteners and accessories. custom egg carton stamp