Our fifth home maintenance tip refers to testing water shut-offs. Your house has lots of valves to seal off the water just in case something breaks and starts leaking
check here . However, unless you use these shut-off valves for some time, they may seize up which will help prevent working. Obviously that is a problem in case you have a leak, try and turn from the water, and realize you can’t. For this reason, it's very important that you test each shut-off car should be done a year to be certain it works when it's needed.
Seats either come included within the body of an gate valve or perhaps in seat ring construction. Integral seats include the same material since the valve body. In a seat ring construction, the seats thread into position or press into position before they become seal welded in to the valve body. Such construction permits more variation than integral seats and is particularly ideal for higher temperature applications.
Tiger Valve is really a leading valve manufacturing company in Houston, TX. Our great deal of high-quality products include gate valves, ball valves, shut-off pig valves, butterfly valves, as well as other engineered products for your oil and gas industry. For more information regarding our products, email us today.
Rust is often a problem on metal valves, especially outside the home. Inspect the valve regularly for rust. If you spot some you can use a wire brush to scrape the rust off the metal. It is also a good idea to paint the steel gate valve with paint that protects metal against rust. You need to eliminate the rust when you paint it though because rust can certainly still spread.
A great way to keep one of these simple valves working efficiently is to apply it
view more . All you need to do is turn the knob left to close the valve then to the right to look at the valve. Doing this occasionally can prevent the valve from sticking within the pipe and also keeping the wheel loose.
The Wall